How to Price a Side Service So It Actually Pays for Itself
You take on clients, the calendar fills up, and at the end of the month there is less money than the work seemed worth. That is not bad luck — it is usually a price set by copying someone else instead of by working out what your own service needs. The fix is one formula, and it takes five minutes.
The short answer
A side service pays for itself when each job's price covers three things: your fixed monthly costs, a fair hourly rate for your own time, and the cost of doing that one job. Add the first two, divide by the number of jobs you can realistically take, then add the per-job cost — that is your price floor, the lowest price that is actually worth your time.
Charge below the floor and the service quietly loses money even while clients keep coming. Charge at or above it and every booking moves you forward.
Start with your true hourly cost, not a competitor's price
Take a side service you run on weekends: 16 hours a month, with each job taking about 2 hours, so you can take 8 jobs a month. Your fixed costs are $160 a month — software $60, phone and internet share $40, insurance $35, and marketing $25. Each job also costs $12 in materials, travel, and payment fees.
Now price your own time. If your time is worth $30 an hour, 16 hours is $480 a month. Add the fixed $160 and you need $640 a month before per-job costs. Divide by 8 jobs and each job must carry $80 toward fixed costs and your pay, plus the $12 per-job cost — a price floor of $92.
That $92 is the number everything else hangs on. It already includes your pay, so a price at the floor is not generous — it is the minimum for the service to be worth doing.
How many clients it takes to break even
At a $110 price, the first question is how many clients cover the fixed costs alone. Each job contributes $110 minus the $12 per-job cost, or $98, toward the $160 of fixed costs. Divide $160 by $98 and you get about 1.6 — so 2 clients cover the fixed costs, and everything after that starts paying you.
The fuller question is how many clients hit your pay target too. You need $640 toward fixed costs plus pay, and $640 divided by $98 is about 6.5 — so 7 clients. At 7 jobs for $110, revenue is $770, per-job costs are $84, fixed costs are $160, leaving $526, which is $32.88 an hour across your 16 hours — above your $30 target with one spare slot in the month.
That spare slot matters. A price that only works at full capacity leaves no room for a cancelled booking or a slow week. If your price needs every slot filled to hit your target, it is too low.
Why copying a competitor's price usually loses money
Suppose a competitor charges $75 for a similar job and you match it. At 8 jobs, revenue is $600, per-job costs are $96, fixed costs are $160, leaving $344 — just $21.50 an hour for your 16 hours, well below the $30 you set. The competitor might have lower fixed costs, a faster process, or a price that is quietly losing them money. You cannot tell from the price tag.
At $100, the same 8 jobs leave $544, or $34 an hour — above target, but only at full capacity. At $110, you clear the target with 7 of 8 slots filled, which is a much safer place to live. The difference between $75 and $110 looks like a lot to a buyer, but to you it is the difference between $21.50 an hour and $32.88 an hour.
If a competitor's price sits below your floor, that is information, not an instruction. Either their costs are genuinely lower, or they are subsidizing the work with a day job.
A second example: fewer jobs, higher floor
Now try a service with less capacity: 12 hours a month, 3 hours per job, so only 4 jobs a month. Fixed costs are $90, per-job costs are $20, and your time is worth $25 an hour, or $300 for the month. Add $90 and $300 to get $390, divide by 4 jobs to get $97.50, add the $20 per-job cost, and the floor is $117.50 — so charge $120.
At $120 for 4 jobs, revenue is $480, per-job costs are $80, fixed costs are $90, leaving $310, or $25.83 an hour — just above target. Copy a $90 competitor instead and the same 4 jobs leave $190, or $15.83 an hour. Fewer jobs means each job must carry more of the fixed costs, which is why low-volume services need higher prices, not lower ones.
Do not forget platform fees and taxes
If clients find you through a platform that takes 10%, a $100 price only puts $90 in your pocket. To keep $100 after the fee, divide by 0.9: $100 divided by 0.9 is $111.11, so charge $112. Fees are a per-job cost like any other, so add them to the variable cost before you work out the floor.
Taxes work the same way, just once a month instead of per job. If the $544 month from the main example is taxable income, setting aside 25% means $136 goes to tax and $408 stays. Your actual tax rate depends on your situation, so treat 25% as a planning habit, not a tax calculation — the point is to reserve the share before you spend it.
A price that ignores fees and taxes looks profitable until the payout and the tax bill arrive.
The raise test: fewer clients can still mean more pay
Raising prices feels risky because you might lose clients. Test it with the numbers. At $125 instead of $110, 7 jobs bring $875, minus $84 in per-job costs and $160 fixed, leaving $631 — $39.44 an hour, well above the $30 target.
Even if the raise costs you a client, 6 jobs at $125 leave $518, or $32.38 an hour — slightly below the $526 total from 7 jobs at $110, but earned in 4 fewer hours and still above your $30 target. That trade — a little less total pay for noticeably fewer hours — is often worth taking, and it frees a slot for a better-paying client.
Raise when you have a waitlist, when jobs consistently take longer than quoted, or when your costs rise. Tell existing clients before the new price applies to them, and let the numbers, not guilt, decide whether the raise worked.
Your five-step price check
First, list your fixed monthly costs honestly — software, phone, insurance, marketing, anything you pay whether or not a client books. Second, set your hourly rate and multiply by your real monthly hours, not the hours you wish you had. Third, count your realistic jobs per month from hours divided by hours per job, not from hope.
Fourth, run the floor: fixed costs plus pay, divided by jobs, plus per-job cost. Fifth, set your price above the floor with slack for one empty slot, then add platform fees and a tax reserve on top. If the result looks high, check your costs before cutting the price.
Re-run the check whenever a cost or your hours change, or a quarter passes.
Run your own numbers: use the free Break-Even Calculator to find how many clients cover your costs, the Freelance Rate Calculator to check your hourly rate, and our guide on what your break-even point says about your prices to test whether a price change helps or hurts.
Frequently asked questions
What if my side service has no fixed costs?
It almost certainly has some — phone, internet, software, travel, or insurance, even if they are small. Count the share used by the service, not the whole bill. And your time is never free: even with zero fixed costs, the floor is your hourly pay divided across jobs plus per-job costs.
Should I match my competitors' prices?
Only if your costs and capacity match theirs, which they rarely do. A competitor's $75 price means nothing without their fixed costs, hours per job, and hourly target. Run your own floor first; if it sits above their price, either your costs are higher or their price is unsustainable.
Should I charge hourly or per job?
Per job is usually better for a side service: clients know the total upfront, and you keep the gain when you get faster. Just make sure the per-job price still clears the floor — divide it by the hours the job takes and check the hourly result against your target rate.
What if I cannot fill all my available slots?
Then your floor is higher, because fewer jobs must carry the same fixed costs and pay. With the main example's $640 to cover, 6 jobs instead of 8 pushes the floor to $118.67 per job. Price for realistic bookings, not maximum capacity.
Do I need to include taxes in my price?
You need to reserve for them, even if you do not add a tax line to the price. Setting aside a share of each month's profit — 25% is a common planning figure — keeps the tax bill from wiping out a good month. Your real rate depends on your tax situation.
How often should I re-price a side service?
Whenever a major cost changes, your available hours change, or a quarter has passed. Also re-price when you have a waitlist or jobs keep overrunning their quoted time — both are signs the price is below what the service is worth.